The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-40 is truly a gorgeous looking and sounding microphone. The design, character and performance is comparable to some of the world's finest Stereo FET Mics...but at a fraction of their cost!
Our rugged CK-40 microphone body and capsule assembly are precision machined of BRASS. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and grill. The Discreet Class A Low-Noise FET circuitry will yield pleasing professional results comparable to much more expensive designs.
Any studio can proudly offer the stereo CK-40 as a group vocal mic, room mic, piano mic, or utility condenser due to its versatility...It exudes class visually as well as sonically.
Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile Avantone CK-40 Stereo Class A FET microphone features twin LARGE 35mm center-terminated pressure gradient transducers. Their close physical proximity places them in a tight vertical array to allow accurate stereo imaging without phase issues arising. The top capsule/grill assembly rotates UP TO 90 degrees relative to the lower capsule/grill assembly. This feature along with the multi-pattern independent selector choices allow for all stereo recording techniques to be utilized. (XY-Coincident / Blumlein, M-S)
ข้อมูลจำเพาะ |
Type
Stereo True Condenser Microphone
Polar Patterns
Cardioid, Omni, Figure-8 (x2)
Capsule(s)
(2) Dual plate 35mm gold sputtered diaphragm / brass assembly
Frequency Response
20-20,000 Hz +/- 3dB
Output Impedance
<=250 Ohms / transformer isolated
Maximum SPL
147 dB (0.5% THD @1000Hz)
Equivalent noise level
17dB (A weighted EC651)
S/N Ratio
77dB re 1Pa
Sensitivity
-40dB
Output Connector
Male XLR 5 pin with included breakout box and cable
Included Accessories
-Wood Box
-Shockmount
-Foam Filter
-2x1 splitter box
-30' Cable
-Metal road case
High-Pass Switch
80 Hz 6dB/octave
Attenuation Switch -10dB
Power Requirements
Standard 48 Volt Phantom (x2) 3mA current consumption
Finish
Polished Nickel trim / Metallic Cabernet Red Body
Weight
.95 kgs / 2.1 lbs
Dimensions
27.6cm X 49mm |