iD22’s dedicated talkback technology enables you to use any audio source connected to your computer such as a built in or USB microphone as your talkback mic, freeing up valuable mic pres for recording.
Speed up your workflow with iD22’s three programmable function buttons. Assign any of the advanced monitoring features, including Speaker Select, Mono Sum, Talkback or Cue Mix monitoring, to any of the F-buttons and experience customisable hardware control at your fingertips.
Speaker + Headphone Outputs
Plug in and listen to your mixes through two sets of speakers with iD22’s 4 line outputs or work via headphones using the independent headphone amp.
| MIC GAIN: |
10 to +60 dB (-10dB Pad) |
| LINE GAIN: |
-20 to +40 dB (-10dB Pad) |
| PHANTOM POWER: |
48v +/-4v @ 10mA/Channel |
| MIC EIN: |
<-126dBu |
| CMRR: |
>80dB @ 1kHz |
| MAXIMUM INPUT LEVEL: |
+22dBu (+32dBu with Pad) |
| INPUT IMPEDANCE (Mic): |
>3kΩ Balanced |
| INPUT IMPEDANCE (Line): |
>10kΩ Balanced |
| FREQUENCY RESPONSE: |
+/-0.5dB 10Hz to 100kHz |
| CROSSTALK: |
<-90dBu @ 1kHz & 10kHz |
| THD+N @ 0dBu (1kHz): |
0.0015% (-96dBu) |
| SNR: |
96dB |
| Pad: |
-10dB |
| HPF: |
-3dB @ 100Hz, 2nd Order (12dB/Octave) |
| XLR: |
Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
| 1/4” JACK: |
TIP (Hot), RING (Cold) & SLEEVE (Shield) |
| D.I GAIN: |
-16 to +54 dB (-10dB Pad) |
| MAXIMUM INPUT LEVEL: |
+16dBu (typical), +22dBu |
| INPUT IMPEDANCE: |
1MegΩ Unbalanced |
| FREQUENCY RESPONSE: |
+/-0.5dB 10Hz to 50kHz |
| THD+N @ 0dBu (1kHz): |
<0.03% (-70dBu) |
| SNR: |
93dB |
| 1/4” JACK: |
TIP (Hot) & SLEEVE (Shield) |
Insert Sends (Mic Pre Out):
| MAXIMUM OUTPUT LEVEL: |
+22dBu |
| OUTPUT IMPEDANCE: |
<100Ω Balanced |
| 1/4” JACK: |
TIP (Hot), RING (Cold) & SLEEVE (Shield) |
ADC Line Inputs (Insert Returns):
| MAXIMUM INPUT LEVEL: |
+18dBu |
| DIGITAL REFERENCE LEVEL: |
0dBFS = +18dBu |
| INPUT IMPEDANCE: |
>10kΩ Balanced |
| FREQUENCY RESPONSE: |
+/-0.5dB 10Hz to Fs/2 |
| CROSSTALK: |
-100dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): |
<0.002% (-94dB) |
| THD+N @ -6dBFS (1kHz): |
<0.0015% (-97dB) |
| DYNAMIC RANGE: |
117dB un-weighted, 120dB A-weighted |
| 1/4” JACK: |
TIP (Hot), RING (Cold) & SLEEVE (Shield) |
| MAXIMUM OUTPUT LEVEL: |
+18dBu |
| DIGITAL REFERENCE LEVEL: |
0dBFS = +18dBu |
| OUTPUT IMPEDANCE: |
<100Ω Balanced |
| FREQUENCY RESPONSE: |
+/-0.5dB 5Hz to Fs/2 |
| CROSSTALK: |
-110dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): |
<0.0008% (-101dB) |
| DYNAMIC RANGE: |
110dB un-weighted, 114dB A-weighted |
| 1/4” JACK: |
TIP (Hot), RING (Cold) & SLEEVE (Shield) |
| MAXIMUM OUTPUT LEVEL: |
+18dBu |
| DIGITAL REFERENCE LEVEL: |
0dBFS = +18dBu |
| OUTPUT IMPEDANCE: |
<100Ω Balanced |
| FREQUENCY RESPONSE: |
+/-0.5dB 5Hz to Fs/2 |
| CROSSTALK: |
-110dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): |
<0.0008% (-101dB) |
| DYNAMIC RANGE: |
110dB un-weighted, 114dB A-weighted |
| 1/4” JACK: |
TIP (Hot), RING (Cold) & SLEEVE (Shield) |
| ADAT 8 CHANNELS: |
44.1 – 48kHz |
| ADAT 4 CHANNELS: |
88.2 – 96kHZ |
| STEREO S/PDIF: |
44.1 – 96kHz |
| No. of INPUT CHANNELS: |
10 (2 Analogue, 8 Digital) |
| No. of OUTPUT CHANNELS: |
14 (6 Analogue, 8 Digital) |
Power Supply:
12VDC Centre Positive DC Adapter – >1.5Amps
Internally conditioned to provide +48VDC, +/-15VDC & low voltage rails for digital processing core & converters. iD22 cannot be bus powered for quality reasons.
วิธีการสั่งซื้อ
ติดต่อเรา
วันจันทร์-วันเสาร์ เวลา 09.00 - 18.00 น.
[email protected]
@kimlengaudio
189/6 ม.12 ถ.บางนา-ตราด กม.6 ซอยมิตรภาพ ต.บางแก้ว อ.บางพลี จ.สมุทรปราการ 10540
